Both the TimeCast™ Wireless Digital and Wired Digital clocks are available in an elapsed timer version. This adds count-up and count-down timer functionality to radio frequency, Wifi, and wired system clocks. The Elapsed Timers can also be used in stand-alone mode where the time on the clock is set using the OLED user interface display of the side of the clock.

Control of timer functions is handled by the DLU-ET-CTRL series switch plates (see Accessories). The optically isolated input also allows the timer to be initiated by other equipment for use as a code blue or other process cycle timer. The timer can count up or down durations up to 99:59:59 and an integrated beeper or remote output can signal the end of the count-down cycle.

The OLED display on the side of each clock provides easy setup and diagnosis, user buttons provide menu navigation. See the time since the last reset and the type of reset that was received. Clock and timer settings such as count-down duration, timer mode, brightness, auto-dim thresholds, and 12-hour or 24-hour time display format also utilize this easy to understand display.

Available in both 2.3” and 4” wide bar digits that increase the visibility over clocks of comparable size. NATSCO’s exclusive automatic dim feature decreases the brightness to compensate for low ambient light levels associated with surgical suites and video productions. This not only provides a pleasant brightness level, but also saves energy during nighttime hours. Nine brightness levels may be selected to satisfy the brightest locations. Add a durable metal housing to the long life epoxy filled digit segments and you won’t find better value.

The 24VAC/DC version can leverage easier to install, low voltage, power-limited wiring for less costly installation. The 120V version includes a 120/24V transformer that mounts in a standard electrical box. The wall transformer version can plug into a nearby standard 120V outlet. Cases are available in black or grey.

Accessories

DLU-ET-CTRL Switch Control. The DLU-ET-CTRL remote switch control panel is used to control the TimeCast™ Digital Elapsed Timers. Heavy duty rocker switches on a stainless-steel single-gang plate provide remote timer controls up to 100' away. These IP65 sealed switches can select between Clock/Timer display and control all of the timer functions. Ordered separately.