C2 Synchronized Horn Strobe (Fixed)
The NATIONAL TIME C2 Synchronized Series is a low
profile strobe or horn/strobe combination that offers dependable audible and visual alarms. The C2
Series horns provide selections for high/low dBA, continuous/code 3 temporal horn sound settings for
high frequency tone, mechanical tone and chime tone. In addition the horn can be selected for a slow
whoop tone operation. The high to low dBA selection will reduce horn output dBA and is used in
environments with low ambient noise levels. The high frequency (2400 Hz) selection is recommended
for use in remote signal applications. The low frequency (factory) selection is recommended for use
in evacuation signaling application. The C2 Series horns are factory shipped for code 3 temporal
selection. The C2 Series strobe provides a low operating current and a minimum flash rate of 1Hz
across the rated input voltage range. The C2 candela intensity come in 15CD, 15/75CD, 30CD, 60CD,
75CD, 110CD or 177CD versions. The C2 Series easy slide mounting system provides convenient
installation and device testing operation. The C2 Series operates from the synchronized outputs on
the National Time Synchronized Series, Fire Alarm Control Panel or Notification Appliance Control
Panel or from the Remote Power Supply providing individual synchronized horn and strobe operation on
the same 2 wires. The C2 Synchronized Series comes standard with the 4" mounting plate. The mounting
plate will mount to a 4" square box, a 2-gang masonry box, a 2-gang switch box, a single gang
masonry box or a single gang switch box for flush mount appliances. For surface mount appliances use
the SG-CBB surface box. The C2 Synchronized Series appliances are UL 1971 listed for use with fire
protective systems.
|
|
Low Operating Current